Our double-drum vibrating roller (hydraulic transmission) is heavy duty compacting equipment. It is reliable in performance and high in quality.

Due to those advantages, our double-drum vibrating roller is extensively suitable to do rolling work on hot mix asphalt pavements, cement stabilized layers, and concrete roads. Additionally, good effect will be achieved if it is applied to new type modified asphalt pavements such as highways.

Double Drum Vibrating Roller (Hydraulic Transmission) SWC208H

Main Specifications of SWC208H Double Drum Vibrating Roller

Bottom

Engine
Model	Cummins 4BT3.9
Power rate	75 KW
Rated speed	2200rpm
Type	Vertical ,water cooling, four stroke, direct injection
Rated fuel consumption	210 g/kw·h
Traveling performance
Grade ability	40%
Traveling speed (km/h)	0-11.1
Axle
Drive type	Dual wheel drive
Front axle load	4000 kg
Rear axle load	4000 kg
Working equipment
Type	Hydraulic vibration
Frequency	40/46 Hz
Amplitude	0.67/0.34 mm
Static linear load	231 N/cm
Vertical oscillation	8º
Drum shell thickness	20 mm
Centrifugal force(high ampl.)	120 KN×2
Centrifugal force(low ampl.)	60 KN×2
Brake system
Travel brake	Oil cut off brake
Parking brake	Button operated
Steering system
Type	Articulated frame, hydraulic steering
Steering cylinder	Two cylinders
Steering pump	Gear pump
Working pressure	13MPa
Steering angle	±35º
Min. steering radius	5605 mm
Refill capacity
Hydraulic tank	55 L
Vibrating bearings	20L
Coolant liquid	34 L
Reducer	2.6L
Fuel tank	80L
Engine crank case	16L
Dimensions
Overall length	4562 mm
Overall width	1850 mm
Overall height	2930 mm
Drum width	1730 mm
Wheel base	3717 mm
Drum Dia	1050 mm
Min. ground clearance	324 mm

• 1. 
  2. Pneumatic Tire Roller (Hydraulic Transmission) Cummins engine
     10~30 ton operating weight
     Full hydraulic drive ...
• 1. 
  2. Pneumatic Tire Roller (Mechanical Transmission)Cummins engine
     10~30 ton operating weight
     Mechanical drive ...