Description of Wheel Loader SWL60F

Wheel loader is also known as skip loader or bucket loader, as kind of ideal construction machinery (engineering equipment).

Features of Wheel Loader SWL60F
1. Equipped with reliable Cat C6121 engine, original GRAZIANO wet type axle;
2. Combined seal cylinder;
3. Kick-down switch allows better efficiency & easy operation;
4. Reliable ZF transmission case and torque converter;
5. Bucket automatic leveling ability.

Applications of Wheel Loader SWL60F

1.As a kind of construction machinery (construction equipment), it is commonly used to move a stockpiled material from ground level and deposit it into an awaiting dump truck or into a open trench excavation;
2.In construction areas, it is also used to transport building materials into or onto another type of engineering machinery (dump truck, conveyor belt, rail-car, etc.), especially in urban engineering projects and small earthmoving works;

Main Specification

Overall Dimension
Length(with bucket on ground)	8280(mm)
Width(to outside of wheels)	2897(mm)
Bucket width	3064(mm)
Height(To the top of the cab)	3565(mm)
Wheel base	3300(mm)
Tyre tread	2300(mm)
Min. ground clearance	460(mm)
Main Technical Specification
Rated load	6000(Kg)
Operating weight	18600kg
Rated bucket capacity	3.5(m3)
Max. breakout force	186KN
Max. Drawing force	180 KN
Max. dump clearance	3028(mm)
Dump reach	1229(mm)
Dump angle at any position	≥450
Digging depth(with bucket bottom horizontal)	212(mm)
Min. turning radius
Outside of bucket	6870(mm)
Outside of rear wheel	6400(mm)
Pivot angle frame	38+10
Oscillating angle of rear axle	+12o
Lifting time of bucket	6.0(sec.)
Lowering time of bucket	3.9(sec.)
Dumping time	1.9(sec.)
Traveling speed(Km/h)
1st gear (Forward & reverse)	6.6
2nd gear (Forward & reverse)	11.7
3rd gear (Forward & reverse)	23.1
4th gear (Forward)	36
Diesel Engine
Model	C6121ZG20(TIER1)
Type	Direct injection. Turbocharged. Water cooling
Rated output	174kW
Inter-bore of cylinder/stroke	121/152(mm)
Total exhaust of cylinder	10.5L
Model of starting motor	4N3181
Power of start motor	7.5(KW)
Voltage of starting motor	24V
Rated speed	2200rpm
Max. Torque	918.5(N.m)
Starting type	Electric
Min. specific fuel consumption	238g/Kw.h
Engine specific oil consumption	0.95-1.77(g/Kw.h)
Net weight	960Kg
Transmission System
Torque Converter
Type	3-element.single stage
Torque ratio	2.55
Max. Dia. of flow path	340(mm)
Cooling type	Pressure oil circulating
Gear Box
Model	ZF 4WG200
Type	Fixed shaft. Power shift
Gear shift position	4 Forward and 3 reverse gears
Axle and Tire
Type of main reducer	single stage
Gear ratio of main reducer	4.444
Type of final reducer	single stage planetary
Gear of ratio of final reducer	5.167
Total gear ratio	22.963
Size of tyre	23.5-25 -16PR (L-3)
Working Device Hydraulic System
Model of oil pump	P257-G80367ZCA6/P124-G20LIG
System pressure	20(MPa)
Model of distribution valve	7130-B97(HUSCO)
Model of pilot valve	406-1044-1145 (HUSCO)
(d*l)Dimension of lifting cylinder	Ф160*90*801(mm)
(D*l)Dimension of tilting cylinder	Ф210*110*494(mm)
Steering System
Type	Middle articulated frame. full hydraulic power
Model of steering pump	P360-G80467RD6G (for C6121)
Model of steering gear	BZZ3-100
System pressure	16MPa
Dimension of steering cylinder	Ф100*50*425(mm)
Brake System
Type of traveling brake	Air assisted oil.4 wheel brake
Air pressure	0.7-0.8 (MPa)
Type of emergency brake	Manual control cutting-off air brake
Type of parking brake	Inner expand hoof Automatic boosting. inner expand hoof
Oil Capacity
Fuel(diesel)	350(L)
Engine lubricating oil	19(L)
Brake System	2 x 1.5(L)
Oil for converter and gear box	45(L)
Oil for hydraulic system	250(L)
Oil for driving axles(F/R)	70(L)+57(L)

Wheel Loader SWL60F

• 1. 
  2. Wheel Loader SWL50F162kw C6121 engine(Cat licensed)
     Power shift transmisison(ZF technology)
     3M³ bucket capacity:
     5000kg rated load ...
• 1. 
  2. Wheel Loader SWL30 92kw Cummins 6BT5.9-C130 engine
     Power shift transmission
     1.7M³ bucket capacity:
     3000kg rated load ...